|
Panasonic CM402C High Speed & Flexible Placement System With Tray Tower |
 |
 |
|
Machine Capabilities & Features
| Board Sizes |
Min = 50mm x 50mm (2.0" x 2.0")
Max = 510mm x 460mm (20.0" x 18.0") |
| Board Thickness |
Min = .3mm (.01")
Max = 4.0mm (.157") |
| Edge Clearance |
5mm (parts should be a min of 10mm from board edge to ensure no damage occurs) |
| Placement Accuracy |
± 0.035mm Cpk >= 1 (.0013") |
| Placement Speed |
.18 seconds/chip or 20,000 components per hour |
| Board Exchange Time |
1.8 seconds |
| Component Range |
Min = 0201
Max = 100mm x 90mm |
| Component Types |
0201 > Chip Type
SOICs
PLCCs
QFPs
- Min Lead Width = 1mm (.04")
- Min Lead Pitch = .65mm (.025")
BGAs & CSPs
- Min Bump Diameter = .5mm (.018")
- Min Pitch = 1.0mm (.04")
Connectors |
| Placement Angles |
0-359° in .01° increments |
| Supply Types |
Tape (8mm wide to 56mm wide)
- Provided the supplied part is less than 24mm x 24mm
Tubes
Trays |
| # of Feeders Accepted |
| 8mm |
Max. 204 inputs (double tape feeders, small reels) |
| 8mm |
Max. 102 inputs (double tape feeders, large reels) |
| 12/16mm |
Max.102 inputs |
| 24/32mm |
Max. 49 inputs |
| 44/56mm |
Max. 33 inputs |
|
| Board Fiducial Recognition |
|
| Removable Feeder Carts |
Feeder can be setup offline and loaded on the carts to reduce change over time |
| CVT |
Verification and Traceability; on-board barcode scanners to verify feeder setup and track the time and date the component was changed |
| Splice Detection |
Feeders can be changed while running to reduce downtime. The feeders can detect the splice adapter and date/time stamp the component change |
|
|
Perspectives
"The quality and workmanship is exceptional. SenDEC engineers suggested alternative manufacturing methods that have helped us reduce the cost of our printed circuit boards. SenDEC's customer service is extremely cooperative and responsive. Even when we 'need it yesterday', SenDEC bends over backwards to deliver in time."
Jim Childs
Purchasing Agent, Pulsafeeder, Inc.
|
.jpg)
