MPM AccuFlex stencil printers are ideally suited for moderate volume, high-mix printing. The systems combine accuracy and unparalleled flexibility in a compact footprint. The system easily handles boards from 2" x 2" to 20" x 18" and is capable of printing 12-mil pitch devices with consistent accuracy.

Features / Constraints: 

Cycle Time Less Than 10 Sec

± 0.001" (± 25 micron) Alignment Repeatability at 6 Sigma

Large Board Width Range for Maximum Flexibility

• Minimum Board Size = 50mm x 50mm (2" x 2")

• Maximum Board Size = 510mm x 460mm (20" x 18")

• PCB Thickness = 0.8mm - 5.0mm (.03" - .20")

• Edge Clearance = 5mm (parts should be a min of 10mm from boards edge to ensure no damage occurs)

Automatic Pass Thru Increases Line Uptime

2D Paste Inspection

Closed Loop Squeegee Pressure

Programmable Separation Speed

Screen Cleaner (wet/dry/vacuum)

Auto Tooling Pin Placement

Rheometric Pump System

Programmable Paste Dispense

Programmable Attention Alarm